Remove Lokd ransomware

About this threat

Lokd ransomware will try to encrypt your files, and that is why contamination is something you have to avoid. In short, it is known as ransomware. There are numerous ways you may have picked up the infection, possibly either through spam email attachments, malicious ads or downloads from unsecure sources. If you’re searching for methods on how to stop a threat, continue reading this article. A file-encrypting malware infection could lead to very severe consequences, so it is crucial to know how it spreads. If you are not familiar with ransomware, it might be pretty shocking to see encrypted files. A ransom message ought to make an appearance soon after the files are encrypted, and it’ll demand that you buy the decryption tool. Do keep in mind who you are dealing with, as crooks will unlikely feel any responsibility to help you. We highly doubt criminals will help you in data recovery, them simply ignoring you is more likely. You should also think about where the money would be used, it will probably support other malware. Something else you should consider is that a malware researcher might have been able to crack the ransomware, which means they may have released a decryptor for free. Look into that before you make any hurried decisions. For those who do have backup, simply delete Lokd ransomware and then access the backup to restore files.

Lokd_ransomware-1.jpg

Download Removal Toolto remove Lokd ransomware

* WiperSoft scanner, published on this site, is intended to be used only as a detection tool. More info on WiperSoft. To use the removal functionality, you will need to purchase the full version of WiperSoft. If you wish to uninstall WiperSoft, click here.

Ransomware distribution methods

If you’re unsure how the ransomware infected, it might have happened in a couple of ways. Ransomware likes to stick to simple methods, but that is not to say that more elaborate ones aren’t employed at all. Many ransomware creators/distributors stick to sending spam emails containing the ransomware and hosting the malware on different download web pages, as those methods are rather low-level. Ransomware via spam is still perhaps the most common infection method. Hackers would be sold your email address by other crooks, attach the contaminated file to an email that’s made to look somewhat legitimate and send it to you, hoping you would open it. If you know the signs, the email will be rather obvious, but otherwise, it is pretty easy to see why some users would fall for it. If you see that the sender’s email address is completely random, or if the text is full of grammar mistakes, that might be a sign that you’re dealing with an email harboring malware, particularly if it is in your spam folder. Crooks also tend to use popular company names to not arouse doubt. You may never be too cautious, therefore, always check the sender’s email address, even if you are familiar with them. Another thing to look for is lack of your name in the beginning. Senders whose attachments are important enough to be opened wouldn’t use basic greetings like User, Customer, Sir/Madam, as they would be familiar with your name. So if you are an Amazon customer, and they send you an email, you will be addressed with the name you’ve provided them with, and not as Customer, etc.

If you want the short version of this section, always check sender’s identity before you open an attachment. Also, do not press on adverts while you are visiting suspicious websites. If you aren’t careful, ransomware might end up slithering into your device. Whatever the advert is advertising, interacting with it may be troublesome, so ignore it. In addition, you ought to stop downloading from untrustworthy sources. If you’re downloading through torrents, you need to always check whether the torrent is safe by reading the comments. It would not be very strange for vulnerabilities in software to be used for infection. You have to keep your programs up-to-date because of that. All you have to do is install the updates that software vendors release.

How does ransomware act

As soon as the ransomware file is opened, the will scan your system for certain file types and when it identifies them, they’ll be encrypted. Expect to find files such as documents, photos and videos to become encrypted because those files are the ones you would possibly want to get back. As soon as the files are found, the file-encrypting malware will encrypt them using a powerful encryption algorithm. Affected files will have a file extension attached to them and this will help with locating locked files. The ransom note, which ought to pop up soon after the ransomware is finished with your file encrypting, will then demand that you pay a ransom to receive a decryption tool. You might be demanded to pay a $1000, or $20, the amount really varies. While generally, malware researchers think that paying is a bad idea, it’s your decision to make. Looking into other options for data restoring would also be a good idea. If the ransomware could be decrypted, it is possible malware specialists have released a free decryptor. You need to also try to recall if maybe backup is available, and you simply do not remember it. Your system makes copies of your files, which are known as Shadow copies, and if the ransomware did not delete them, you may restore them via Shadow Explorer. If you have not done it yet, obtain backup as quickly as possible, so that your files are not jeopardized again. If you just realized that you did make backup prior to the infection happening, you just have to remove Lokd ransomware, and may then proceed to restore files.

Ways to remove Lokd ransomware

If you’re not completely certain with what you are doing, manual termination isn’t recommended. Irreversible harm could be done to your system, if you make a mistake. It would be wiser to use a malicious software elimination software as the program would do everything. The utility should successfully delete Lokd ransomware since it was developed for this purpose. Your files won’t be decrypted by the utility, because it isn’t capable of doing that. You will have to research how you can restore data yourself.

Download Removal Toolto remove Lokd ransomware

* WiperSoft scanner, published on this site, is intended to be used only as a detection tool. More info on WiperSoft. To use the removal functionality, you will need to purchase the full version of WiperSoft. If you wish to uninstall WiperSoft, click here.


Learn how to remove Lokd ransomware from your computer

Step 1. Remove Lokd ransomware using Safe Mode with Networking

1.1) Reboot your computer with Safe Mode with Networking.

Windows 7/Vista/XP
1. Start → Shutdown → Restart → OK. 2. When the restart occurs, press F8. Keep pressing until you see the Advanced Boot Options window appear. winxp-safemode Remove Lokd ransomware 3. Pick Safe Mode with Networking.
Windows 8/10
1. On the Windows login screen, press the Power button. Press and hold the Shift key. Click Restart. 2. Troubleshoot → Advanced options → Startup Settings → Restart. win10-safemode Remove Lokd ransomware 3. Select Enable Safe Mode with Networking.

1.2) Remove Lokd ransomware.

Once the computer is launched in Safe Mode, open your browser and download anti-malware software of your preference. Scan your computer so that the anti-malware can locate the malicious files. Allow it to delete them. If you are unable to access Safe Mode with Networking, proceed to the instructions below.

Step 2. Remove Lokd ransomware using System Restore

2.1) Reboot your computer with Safe Mode with Command Prompt.

Windows 7/Vista/XP
1. Start → Shutdown → Restart → OK. 2. When the restart occurs, press F8. Keep pressing until you see the Advanced Boot Options window appear. winxp-safemode Remove Lokd ransomware 3. Pick Safe Mode with Command Prompt.
Windows 8/10
1. On the Windows login screen, press the Power button. Press and hold the Shift key. Click Restart. 2. Troubleshoot → Advanced options → Startup Settings → Restart. win10-safemode2 Remove Lokd ransomware 3. Select Enable Safe Mode with Command Prompt.

2.2) Restore system files and settings.

1. Enter cd restore when the Command Prompt window appears. Press Enter. 2. Type rstrui.exe and press Enter. 3. When the System Restore Window pop-ups, click Next. 4. Select the restore point and click Next. windows-system-restore Remove Lokd ransomware 5. Click Yes on the warning window that appears. When the system restore is complete, it is recommended that you obtain anti-malware software and scan your computer for the ransomware just to be sure that it is gone.

Step 3. Recover your data

If the ransomware has encrypted your files and you did not have backup prior to the infection, some of the below provided methods might be able to help you recover them.

3.1) Using Data Recovery Pro to recover files

  1. Download the program from a reliable source and install it.
  2. Run the program and scan your computer for recoverable files. datarecoverypro Remove Lokd ransomware
  3. Restore them.

3.2) Restore files via Windows Previous Versions feature

If you had System Restore feature enabled on your system, you should be able to recover the files via Windows Previous Versions feature.
  1. Right-click on an encrypted file that you want to restore.
  2. Properties → Previous Versions Windows-previous-version Remove Lokd ransomware
  3. Select the version of the file you want to recover and click Restore.

3.3) Shadow Explorer to decrypt files

Your operating system automatically creates shadow copies of your files in case of a crash but some ransomware manages to delete them. Nevertheless, it is still worth a try.
  1. Download Shadow Explorer. Preferably from the official website (http://shadowexplorer.com/), install and open the program.
  2. On the top left corner there will be a drop menu. Search for the disk that contains the encrypted files. shadow-explorer Remove Lokd ransomware
  3. If you do find some folders, right-click on them and select Export.

Leave a reply

Your email address will not be published.